feverbta.blogg.se - Hotpoint 20 inch electric range manual

To improve sliding conditions, use a soft cloth or paper towel to rub vegetable oil on the left and right edges of the racks and/or rack supports. Racks may become difficult to slide, especially after a self-clean cycle.Then lay the rack flat and push it in until it is all the way into the oven. Tilt up the front of the rack and push the rack in until it stops. To replace a rack, place the curved end of the rack onto the rack supports.To remove a rack, pull it toward you until it reaches the stop position, tilt up the front of the rack and pull it out.When placing and removing cookware, pull the rack out to the bump (stop position) on the rack support.Replace the knob, matching the flat area of the knob to the shaft, and check performance.

After the adjustment is made, retighten screws so they are snug, but be careful not to overtighten.

To decrease the oven temperature, move the top screw toward the left. You’ll hear a click for each notch you move the knob. To increase the oven temperature, move the top screw toward the right.

With the back of the knob facing you, hold the outer edge of the knob with one hand and turn the front of the knob with the other hand.

Pull the Oven Temp knob off the range and look at the back side.

User manual Range for Hotpoint RAS200DMWW

Hotpoint RAS200DMWW - 20 Inch Freestanding Electric Range - Use Manual - Use Guide PDF.